When trying to copy a file across an NFS mount point the error “Permission denied‘ is reported.
Unix, Linux, DevOps , Cloud computing and BigData Knowledge-Base
Solaris Troubleshooting : Force an Ethernet network boot client to boot in full duplex or half duplex mode
At Open Boot Prom (OBP) level, all Sun Ethernet interfaces default to use autonegotiation to connect with the highest possible speed and mode. Since most switches and interfaces use this default, too, it is Sun’s recommendation not to change it for regular use
zlogin -l <user> <zonename> or zlogin -C <zonename> Symptoms: can’t log into zone login fails as user
There are two ways to automate the ftp process use the following procedure.
The results of any informative command can be forwarded to the /etc/issue file, or any message of impending doom can be placed in the /etc/issue file to prewarn users. These will be visible before any user can login.
When trying to access a soft partition after a disk replacement, the metareplace command or any direct I/O to a soft partition will fail with the following types of errors:
The one of the usual way to do this is to backup all the tables and do a fresh os install.
NFS write failed: rpc: timed out NFS write error 60 on host <…> fhxxxxxxxxxx
Here we discuss about how to use ‘ipmitool’ to collect information on platform events, sensors, status LEDs, and hardware components, from the Service Processor (SP). It also covers the use of ipmitool for platform startup & shutdown, and SP reconfiguration.
1) Check the related logfiles for error messages: /var/dt/Xerrors (note that this file is recycled by dtlogin, especially, it might be empty after dtlogin has been restarted) $HOME/.dt/*log* (startlog, startlog.old, startlog.older, errorlog, errorlog.old, and errorlog.older) /var/adm/messages /var/adm/messages on the home directory server, especially if users with...