Solaris Admin / Solaris Troubleshooting / solaris X86
by Yogesh Raheja · Published August 26, 2011 · Last modified July 2, 2015
This is a common issue encountered in x-86 solaris boxes. We wont be able to get to the console though all connection and ports for the console are fine. Below are the steps which needs to be done in order to get to the console:
Here we discuss about how to use ‘ipmitool’ to collect information on platform events, sensors, status LEDs, and hardware components, from the Service Processor (SP). It also covers the use of ipmitool for platform startup & shutdown, and SP reconfiguration.
Blog for Unix Admin / Solaris Admin / solaris X86
by Ramdev · Published June 12, 2014 · Last modified July 2, 2015
Instructions to Boot Solaris X86 CDROM to Single User mode: 1) Insert the Solaris x86 CDROM in the drive 2) Boot with the DCA floppy (2.6 and higher) or MDB floppy, (or correct Driver Update Boot diskettes) 3) Select the cdrom to boot when presented with...
Blog for Unix Admin / Solaris Admin / solaris X86
by Ramdev · Published May 2, 2011 · Last modified July 2, 2015
Step by Step procedure for SVM root mirroring: Root and mirror disks, are here referred to as primary and secondary disks respectively. 1. In this step, you will need to boot cdrom in single user mode off the Solaris media or network. You will need to...
[contact-form to='ramkumar.ramadevu@gmail.com' subject='New Learning Request Submitted'][contact-field label='Name' type='name' required='1'/][contact-field label='Email' type='email' required='1'/][contact-field label='Learning Request' type='textarea' required='1'/][contact-field label='Are you Looking for ' type='radio' required='1' options='Paid Training,Free Training'/][/contact-form]
