Category: solaris11-Howto
This how-to article discuss about 1. Display Information about SCSI Devices2. Unconfigure a SCSI Controller3. Configure a SCSI Controller4. Configure a SCSI Device5. Disconnect a SCSI Controller
Creating a static IP address is a two-step process, and it involves creating an IP interface and an IP address. There can be multiple IP addresses associated with an IP interface. IP address objects have names in the form interface/description.
This how-to article discuss about Displaying Information About File Size and Disk Space Displaying File Size Information in 1024 Bytes on a System With a ZFS Root File System Find Large Files from a directory Finding Files That Exceed a Specified Size Limit
Solaris Installation Automated Installer (AI) is the new network based multi-client provisioning system on Oracle Solaris 11. AI provides hands-free installation of both SPARC and x86 systems by using an installation service that installs systems from software package repositories on the network. Create an install service from a...
Read – How to Administrate IPQoS Read Command Cheat Sheet : Managing Services Read Command Cheat Sheet – Image Packaging System Read Command Cheat Sheet – Installation and Deployment Read Command Cheat Sheet – Basic Adminsitration Read – Monitoring System Activities using sar in Solaris Read...
On SPARC platforms, the following two options of the boot command support booting from a ZFS boot environment or root file system: -L Displays a list of available boot environments within a ZFS pool. Note – The boot -L command is executed from the OBP, not from...
A system’s run level (also known as an init state) defines what services and resources are available to users when the system is in that state. A system can be in only one run level at a time. Oracle Solaris has eight run levels, which are...
How to Apply a New Configuration to the IPQoS Kernel Modules You use the ipqosconf command to read the IPQoS configuration file and to configure the IPQoS modules in the UNIX kernel. The next procedure uses as an example the file/var/ipqos/Goldweb.qos Apply the new configuration. #...
How to Manually Set a System’s Date and Time Become an administrator. Enter the new date and time. # date mmddHHMM[[cc]yy] mm Month, using two digits. dd Day of the month, using two digits. HH Hour,...
How to Modify an SMF Service Property This procedure shows how to modify the property that identifies the user that can start a service. Become an administrator Change the value that is assigned to the start/user property.First, give the FMRI to identify the appropriate service....