Author: Ramdev

1

Solaris SDS : Both Submirrors go into ‘Needs Maintenance’ when I/O is performed but no disk errors seen

The following is the Sample SVM(Solaris Volume Manager) configuration of the layered soft partition. d50: Soft Partition Device: d100 State: Okay Size: 10485760 blocks (5.0 GB) Extent              Start Block              Block count 0                        1                 10485760 d100: Mirror Submirror 0: d101 State: Okay Submirror 1: d102 State: Okay...

0

Linux : Identifying Disk Errors in Linux

Below procedure can be used to identify the hard disk errors in linux operating system. Execute the following command to identify the available disk configuration   # /bin/more /proc/scsi/scsi Output will include all the currently available disks to the linux, and the output vary depending on...

1

Mastering Grub – Part 2 – Grub Configurations

1. Grub Configurations GRUB is configured using ‘grub.cfg’, usually located under ‘/boot/grub’. This file is quite flexible, but most users will not need to write the whole thing by hand. 1.1  Simple configuration handling The program ‘grub2-mkconfig’ generates ‘grub.cfg’ upgrading a distribution, and will discover available...

Page 38 of 74