Setup iSCSI storage on Celerra

Below are the steps to setup ISCSI on Celerra

Step:1 Validate network interface on data mover

server_ifconfig server_2 -all

Step:2 Create and mount a file system called iSCSI

nas_fs -n iscsi -c size=100G pool=clar_r5_performance

server_mount server_2 iscsi /iscsi

Step:3 Create the celerra iSCSI target

server_iscsi server_2 -target -alias target -create 1000:np=172.12.32.189

Step:4 List iSCSI target

server_iscsi server_2 -target -list

Step:5 Create 2 iSCSI LUNs

server_iscsi server_2 -lun -number 1 -create target -size 1000 -fs iscsi

server_iscsi server_2 -lun -number 2 -create target -size 1000 -fs iscsi

#Size in MB

Step:6 List LUNs

server_iscsi server_2 -lun -list

Step:7 List all LUNs on target

server_iscsi server_2 -lun -info -all -target target

Step:8 Configure LUN mask

server_iscsi server_2 -mask -set target -initiator -grant 1-2

#Replace with the iscsi initiator

Step:9 Start iSCSI service

server_iscsi server_2 -service -start

Done!